ALUMINUM & GLASS DOORS

CLOPAY ARCHITECTURAL SERIES

The perfect choice for architectural applications that require open visibility, natural light and a modern, industrial design. The full-view series can be used as an exterior garage door, an interior “partition” or even as a versatile patio door to merge indoor and outdoor spaces. Well-suited for restaurants, service stations, car dealerships, fire stations or industrial space requiring maximized daylight views or a distinct contemporary architectural appearance.

Panel Design: Recessed aluminum panel
Gauge: 0.75” thick extrusions .050” aluminum panels
Colors: Clear, bronze anodized, bronze paint, black, anodized, white, commercial brown. Custom colors also available.
Warranty: Limited 5-year finish / 1-year material and workmanship

BROCHURE

Spec Sheet

RAYNOR AlumaView® AV300

details

Aluminum Sectional Rail and Stile Doors
A full 3″ thick, the Raynor AV300 is the sturdiest door in the AlumaView family. The increased thickness adds increased strength and durability. With the incorporation of the U-bar trussing inside the rails, there are no obstructions to your view.

The AV300 is the clear choice for auto dealerships, car washes, corrosive environments, police, fire and ambulance stations, quick lubes, repair facilities, restaurants, marinas, sports facilities and buildings with large opening sizes.

Raynor AlumaView AV300 aluminum sectional rail and stile doors are available with numerous features and options, including those listed below.

Years of Durability: AlumaView door sections are clear-anodized for maximum durability and are designed to withstand minimum wind loads of 20 p.s.f. Higher pressure ratings are available upon request.
Decreased Energy Costs: AlumaView doors help you reduce energy costs with a U-shaped, vinyl bottom weatherseal secured by a sturdy aluminum retainer.
Integral U-Bar: Integral U-bar construction within the rails of the AV300 creates added strength to the section panels and provides for a clean look on the interior of the door by removing trussing obstructions from visible areas (only required for doors wider than 18’2″).
Jamb Seal: EPDM rubber jamb seal also helps to reduce air infiltration and decrease energy costs by sealing the side of the door when closed.
EnduraCote™: The Raynor EnduraCote hardware system comes with springs, track, and hardware that are powder coated to provide a clean, finished look and maximum protection against rust.
Aluminum Panels: For busy work environments and to prevent glass breakage, aluminum panels protect your investment. Choose from impact resistant and insulated panels as well.
Locks: In applications where control and access are important, choose from a variety of locking options to help keep your building secure. Locks come in both inside and outside variations.
Rugged Hardware and Springs: Your AlumaView door comes packaged with the right combination of hardware, track and springs to match your door’s size and application.
Snap-in Retainer: AlumaView panels and glass are sealed and held in place with a snap-in retainer. Clear anodized, RAL9003, RAL 9016 and standard white doors use gray snap-ins. All other doors use black snap-ins.
Header Seal: Flexible vinyl flap header seal reduces air infiltration and energy costs by sealing the top of the door against the header.
Choice of Windows: For maximum design flexibility, choose from tempered, tinted, double-strength, insulated, acrylic, polycarbonate or impact resistant glass in a variety of thicknesses.
Anodized Finishes: Choose from six custom anodize finishes including champaign, light bronze, medium bronze, dark bronze, extra dark bronze, or black.
High-cycle Counterbalance System: For reliable operation in high traffic areas, choose high-cycle torsion springs with 25,000, 50,000, or 100,000-cycle life. For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system.
Carbon Monoxide Vent: Allows you to channel fumes to the outside when the Raynor AlumaView door is closed. Available in a variety of sizes.
IECC Requirements Package/California Title 24: The International Energy Conservation Code (IECC) requires building components to meet minimum Air Infiltration rates. This option will ensure the AV300 and AV200 will exceed the latest IECC and Title 24 standards for air infiltration (only), by using the required header and jamb seals and track mounting. Exhaust ports and pass doors cannot be used. Visit our IECC page for more information.

Product Details
Size: 24′ x 24′ Max

Operation: Manual, Motor or Hand Chain
IECC Thermal Performance: Tested Air Infiltration @ 25 mph 0.24 cfm/ft2

Color Range

BROCHURE

RAYNOR AlumaView® AV200

RAYNOR AlumaView® AV175

details

Aluminum Sectional Rail and Stile Doors
Designed for peak performance and strength, this Raynor AlumaView AV200 aluminum sectional rail and stile 2″ thick door is available in larger sizes and features bold rail construction for maximum durability, reliability, and beauty.

Every Raynor AlumaView AV200 commercial door is built for superior performance and includes the features listed below.

Years of Durability: Door sections are clear-anodized for maximum durability and are designed to withstand minimum wind loads of 20 p.s.f. Higher pressure ratings are available upon request.
Decreased Energy Costs: AlumaView doors help you reduce energy costs with a U-shaped, vinyl bottom weatherseal secured by a sturdy aluminum retainer.
Integral U-Bar:Integral U-bar construction within the rails of the AV300 creates added strength to the section panels and provides for a clean look on the interior of the door by removing trussing obstructions from visible areas (only required in doors wider than 18’2″).
Jamb Seal: EPDM rubber jamb seal also helps to reduce air infiltration and decrease energy costs by sealing the side of the AV200 door when closed.
EnduraCote™:The EnduraCote hardware system comes with springs, track, and hardware that are powder coated to provide a clean, finished look and maximum protection against rust.
Aluminum Panels: For busy work environments and to prevent glass breakage, aluminum panels protect your investment. Choose from impact resistant and insulated panels as well.
Locks: In applications where control and access are important, choose from a variety of locking options to help keep your building secure. Locks come in both inside and outside variations.
Pedestrian Doors*: Pedestrian doors are designed for convenient entry and to help minimize energy loss.
*Some options may be limited to door size or model.
Customized Track*: Track systems are supplied to fit special clearances, inclines or contour applications. Hardware and track systems can be customized to fit any need. Additional trussing is available for special wind loading applications. *Some options may be limited to door size or model.
Rugged Hardware and Springs: Your AlumaView AV200 door comes packaged with the right combination of hardware, track, and springs to match your door’s size and application.
Snap-in Retainer: AlumaView panels and glass are sealed and held in place with a snap-in retainer. Clear anodized, RAL9003, RAL 9016 and standard white doors use gray snap-ins. All other doors use black snap-ins.
Header Seal: Flexible vinyl flap header seal reduces air infiltration and energy costs by sealing the top of the door against the header.
Choice of Windows: For maximum design flexibility, choose from tempered, tinted, double-strength, insulated, acrylic, polycarbonate or impact-resistant glass in a variety of thicknesses.
Anodized Finishes: Choose from six custom anodize finishes including champaigne, light bronze, medium bronze, dark bronze, extra dark bronze, or black.
High-cycle Counterbalance System: For reliable operation in high traffic areas, choose high-cycle torsion springs with 25,000, 50,000, or 100,000-cycle life. For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system.
Carbon Monoxide Vent: Allows you to channel fumes to the outside when the door is closed. Available in a variety of sizes.
Removable Center Posts: Carry-away, swing-up options available for extra-wide openings. Ideal for agricultural or airplane hangar applications.
IECC Requirements Package/California Title 24: The International Energy Conservation Code (IECC) requires building components to meet minimum Air Infiltration rates. This option will ensure the AV300 and AV200 will exceed the latest IECC and Title 24 standards for air infiltration (only), by using the required header and jamb seals and track mounting. Exhaust ports and pass doors cannot be used. Visit our IECC page for more information.

Product Details
Model: AlumaView AV200
Size: 24′ x 24′ Max
Operation: Manual, Motor or Hand Chain
IECC Thermal Performance: Tested Air Infiltration @ 25 mph 0.24 cfm/ft2
Tested U-factor 0.72 (w/IG Low E Glass)

Color Range

BROCHURE

DETAILS

Aluminum Sectional Rail and Stile Doors
This benchmark commercial door provides Raynor reliability and durability to meet, or exceed, the requirements of daily use. With 1-3/4″ thick door sections and streamlined rail construction, the Raynor AlumaView AV175 door is engineered for lasting beauty and durability.

Raynor AlumaView AV175 aluminum commercial doors are available with numerous features and options, including those listed below.

Years of Durability: AV175 door sections are clear-anodized for maximum durability and are designed to withstand minimum wind loads of 20 p.s.f. Higher pressure ratings are available upon request.
Decreased Energy Costs: AlumaView doors help you reduce energy costs with a U-shaped, vinyl bottom weatherseal secured by a sturdy aluminum retainer.
Integral U-Bar: Integral U-bar construction within the rails of the AV300 creates added strength to the section panels and provides for a clean look on the interior of the door by removing trussing obstructions from visible areas (only required in doors wider than 18’2″).
Jamb Seal: EPDM rubber jamb seal also helps to reduce air infiltration and decrease energy costs by sealing the side of the door when closed.
EnduraCote™: The Raynor EnduraCote hardware system comes with springs, track, and hardware that are powder coated to provide a clean, finished look and maximum protection against rust.
Aluminum Panels: For busy work environments and to prevent glass breakage, aluminum panels protect your investment. Choose from impact resistant and insulated panels as well.
Locks: In applications where control and access are important, choose from a variety of locking options to help keep your building secure. Locks come in both inside and outside variations.
Customized Track*: Track systems are supplied to fit special clearances, inclines or contour applications. Hardware and track systems can be customized to fit any need. Additional trussing is available for special wind loading applications. *Some options may be limited to door size or model.
Rugged Hardware and Springs: Your AlumaView door comes packaged with the right combination of hardware, track, and springs to match your door’s size and application.
Snap-in Retainer: AlumaView panels and glass are sealed and held in place with a snap-in retainer. Clear anodized, RAL9003, RAL 9016 and standard white doors use gray snap-ins. All other doors use black snap-ins.
Header Seal: Flexible vinyl flap header seal reduces air infiltration and energy costs by sealing the top of the door against the header.
Choice of Windows: For maximum design flexibility, choose from tempered, tinted, double-strength, insulated, acrylic, polycarbonate or impact-resistant glass in a variety of thicknesses.
Anodized Finishes: Choose from six custom anodize finishes including champaign, light bronze, medium bronze, dark bronze, extra dark bronze, or black.
High-cycle Counterbalance System: For reliable operation in high-traffic areas, choose high-cycle torsion springs with 25,000, 50,000, or 100,000-cycle life. For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system.
Carbon Monoxide Vent: Allows you to channel fumes to the outside when the AV175 door is closed. Available in a variety of sizes.

Product Details
Door Type: Commercial Sectional Garage Doors
Model: AlumaView AV175
Size: 16′ x 14′ Max
Operation: Manual, Motor or Hand Chain

Color Range

BROCHURE